EGR Offered For Dual-Fuel ME-GA Engine

By Jack Burke24 November 2020

MAN Energy Solutions will offer its proprietary exhaust gas recirculation (EGR) system as an emissions solution for its new, low-speed ME-GA engine, the Otto-cycle variant of its ME-GI dual-fuel engine.

EGR is a NOx-emissions-reduction technique that ensures IMO Tier 3-compliance in both diesel and gas mode.

The company said it has long experience with the emission-reduction technology and reported the first order for an EGR system in 2011 when it was fully integrated within the MAN B&W 6S80ME-C9 main engine of a 4500 teu containership newbuilding.

“Nine years have passed since our very first EGR system passed its Factory Acceptance Test, and the knowledge we have subsequently gained in the field has led to today’s fully-mature solution,” said Thomas S. Hansen, head of Promotion and Customer Support, MAN Energy Solutions. “Our EGR system not only achieves NOx-compliance but also delivers a performance upgrade for both conventional and now ME-GA engines.”

MAN Energy Solutions reports that EGR will enable the ME-GA to reduce specific gas consumption by ~3%, and specific fuel-oil consumption by 5%. It will also significantly reduce methane slip by 30 to 50% and solve the issue related to pre-ignition on Otto-cycle engines.

MAN Energy Solutions states that it has received orders for over 241 engines with EGR, with more than 33 units already in service. The company expects to deliver the first, commercial ME-GA low-pressure dual-fuel engine by end-2021.

As previously stated, EGR will help reduce the ME-GA’s methane slip by 30 to 50%, while lowering specific gas consumption by around 3% and specific fuel-oil consumption in diesel mode by 5%. EGR will enable the ME-GA to meet Tier 3 requirements in both fuel oil and gas modes without additional aftertreatment.

MAN Energy Solutions plans to make the EGR option available from late 2021, concurrent with the introduction of the ME-GA. The company said its experience with designing and delivering low-pressure and high-pressure EGR versions has enabled it to bring the new solution to market in a relatively short time.

The ME-GA EGR solution is a high-pressure system, which can be integrated into existing engine-room designs, and the EGR unit itself does not change the engine footprint. Its design-similarity to that of ME-C engines’ EGR systems will lower its price point, since the supply chain and components are already matured.

The EGR system works by drawing around 30 to 50% of the engine’s exhaust gas into the EGR receiver, where it passes through a pre-spray to lower its temperature, before passing through a cooler spray. After passing through a water-mist catcher, the gas then goes through a blower to increase pressure back up to scavenging air pressure, before being fed back into the compressor and the engine.

The volume requirements of the ME-GA EGR system are significantly lower with, for example, less pipework required than for low-pressure EGR solutions, the company said.

Introducing an EGR solution also improves the stability of the combustion process. MAN Energy Solutions is currently researching how far it can lower methane slip while maintaining a good equilibrium with recirculation.

“With our hard-earned experience – added to the rigorous testing that all our EGR systems undergo – we are the de-facto market leader and play a vital role in decarbonizing the maritime industry. Our robust EGR solutions fully integrate with other ship systems and are easily integrated with the ME-GA engine.”

MAN Energy Solutions is developing the high efficiency, low-pressure, two-stroke, dual-fuel MAN B&W ME-GA engine at its Research Centre Copenhagen. The engine delivers a low CAPEX solution aimed at certain vessel types and applications – such as LNG carriers – that are able to use ‘boil-off’ gas as a source of fuel, or smaller ships where low capital outlay is a priority.

Based on the well-proven MAN B&W dual-fuel design with minimal installation requirements, the MAN B&W ME-GA uses an efficient ignition concept and unique gas-admission system that delivers safe and reliable operation.

The ME-GA furthermore features minimal operational costs, simple supply and purging concepts, and low maintenance costs for its fuel-gas supply system

MAGAZINE
NEWSLETTER
Delivered directly to your inbox, Diesel Gas & Turbine News; News features the pick of the breaking news stories, product launches, show reports and more from KHL's world-class editorial team.
CONNECT WITH THE TEAM
Jack Burke Senior Editor, Diesel Gas Turbine Tel: +1 262 754 4150 E-mail: jack.burke@khl.com
Gabriele Dinsel Sales Manager Tel: +49 711 3416 74 71 E-mail: gabriele.dinsel@khl.com
CONNECT WITH SOCIAL MEDIA
Latest News
Total drops API over climate change differences
French multinational at odds with industry group
Update: GE accuses Siemens of stealing trade secrets
Alleges ‘billions of dollars’ in contracts affected
Mitsubishi turbines for coal-to-gas conversion
Canadian plant adding 560 MW of net capacity